applicable materials: paper, cardboard, drivers licences, passports, diplomas, certificates and official documents.
The positioning of documents can be individually adjusted by a rear gauge. The maximum insertion depth from the edge of documents is approx.70 mm. The embossing is effected by means of a push botton. As an option, a foot-switch can be supplied. By means of pulling up the embossing head, the stamp set can be easily and quickly exchanged. The embossing pressure can be precisely adjusted to the corresponding thickness of the material to be embossed. The quality of an embossing depends on the quality of an embossing stamp. For this reason all PERNUMA embossing stamps are made out of brass or steel and are manually engraved. The plastic lower stamp is precisely fitted to the upper stamp by a special process. Upon request all embossing machines can be delivered with a stamp set (upper- and lower stamp). Safety LockIn order to prevent the abuse of the embossing machine, model EMBOSSET is equipped with a safety-lock.
PERFOSET E/P is a very robust, electrical embossing machine for office use.Stamp diameter can be up to 75 mm.The embossing is released by pressing a push button on the side of the machine. For securing official documents or photographs in passports, also for embossing certificates, sheets of writing paper, business cards, etc. without applyingany physical force. Our electric embossing machines were designed for satisfying high demands. Even in more solid materials like cardboard or pasteboard and with bigger embossing stamps you will easily obtain needle-sharp impressions.The insertion depth is approx. 105 mm from the paper edge to the center of the impression. In order to enable exact positioning of every imprinton its corresponding forms, the machines are by production line supplied with adjustable stops for side and depth. The upper stamp is engraved in brass or steel. The lower stamp is made of plastic.