This small unit is especially designed for personal use. It is capable of embossing clearly visible signets or coat of arms up to a diameter of 25 mm. When ordering the MICROSET with engraved stamp set a pattern must be supplied. It is also necessary to determine whether the stamp is to be embossed on the top or bottom of the document. The stamp can also be installed at a 90° angle in order to emboss from the side.
Hand-operated embossing machines are equipped with an adjustable sideand rear gauge in their standard version in order to facilitate an exact positioning of the imprint. By fitting in a security lock it can be prevented that unauthorized persons work with the machines.The engraving of the upper stamp is mainly made in brass. The lower stamp is made of hard plastic. The diameter of the stamp set may be up to 40 mm. Brilliant impressions can be achieved on paper orthin cardboard with a thickness of up to 120 g/m2. The insertion depth is 75 mm (from the paper margin up to the middle of the impression).
The diameter of the stamp set may be up to 75 mm. Paper or cardboard can be embossed with a thick-ness up to 300 g/m2. The insertion depth is 100 mm (from the paper margin up to the middle of the impression).